Plastics

FDM technology creates solid objects by layering melted plastic filament, while MSLA technology uses UV light to cure liquid resin layer by layer, offering a much higher definition.

ABS


ABS is a highly robust and versatile material with excellent thermal resistance, showing minimal to no deformation up to 98 °C. It is suitable for both indoor and outdoor use. ABS contains high-wear-resistance synthetic rubber, which makes it very tough and impact-resistant.

ASA


ASA filament offers a range of properties that make it ideal for engineering and outdoor applications. Stiffer and stronger than ABS, it has high UV resistance and is impact-resistant.

PA12-CF


PA12-CF filament offers high stiffness, thermal resistance up to 120 °C and reduced weight thanks to its carbon fibre content. Ideal for functional parts.

PA6/66 CF


PA6/66 CF filament is a technical nylon: rigid, stable and heat-resistant (120 °C). Excellent for structural parts, brackets, mounts, automotive and mechanical components.

PC ABS V0


PC ABS V0 filament is UL94 V0 certified and ideal for automotive and railway applications.

  • Tensile strength: 54 MPa
  • Flexural modulus: 2750 MPa
  • Relative permittivity 100 Hz: 3.2
  • Dissipation factor 100 Hz: 5E-03
  • Dielectric strength: 30 kV/mm

PC Blend


PC Blend is suited to printing functional components for operating machinery. It offers high tensile strength, perfect layer adhesion and high impact resistance. Excellent mechanical strength. High resistance to heat and chemicals. Good electrical insulation properties.

PC Blend Carbon Fiber


PC Blend Carbon Fiber (PCCF) is a PC Blend reinforced with carbon fibres to improve strength, toughness and temperature resistance. PCCF offers excellent dimensional stability, good resistance to UV rays and common chemicals, improved tensile strength and, above all, high-temperature resistance. Ideal for functional parts.

PC-PBT GF


PC-PBT GF filament resists many chemicals, oils, greases and fuels. It offers dimensional stability, and the glass fibre gives it higher impact resistance.

  • Tensile modulus: 6100 MPa
  • Flexural modulus: 6 GPa
  • Thermal conductivity: 0.20 W/m·°C

PETG


PETG filament combines strength and flexibility; its chemical stability also makes it suitable for food contact and skin contact.

  • Tensile modulus: 2980 MPa
  • Flexural modulus: 2040 MPa
  • Elongation at yield: 4%

PETG CF


PETG CF filament offers high strength, durability and good resistance to elastic deformation.

PLA


PLA filament offers fast printing speeds and a good detail finish, making it suitable for applications that require low mechanical properties.

PP


PP filament is used for:

  • Lightweight parts
  • High chemical resistance
  • Good flexibility
  • Impact resistance

PPGF30


PPGF30 filament has a homogeneous fibre distribution. Ideal for housings and impellers, and for components in contact with highly aggressive fluids; suitable for ATEX applications.

  • Tensile strength: 54 MPa
  • Modulus of elasticity: 7 GPa
  • Flexural modulus: 6 GPa
  • Continuous service temperature: 100 °C

PPS-GF25


PPS-GF25 filament strikes the right balance between stiffness and light weight.

  • Chemical-resistant
  • Tensile strength: 126 MPa
  • Modulus of elasticity: 11 GPa
  • Continuous service temperature: 220 °C

TPU 80 Shore


TPU filament is highly resistant to chemicals, scratch-resistant and offers good elastic recovery.

  • Hardness: 80 Shore A
  • Tensile strength: 50 MPa
  • Charpy impact ISO 179: No break

TPU 98 Shore


TPU filament is highly resistant to chemicals, scratch-resistant and offers good elastic recovery.

  • Hardness: 98 Shore A
  • Maximum elongation: 470%
  • Tensile modulus: 40 MPa

Black Resin V5


Black Resin is a general-purpose standard resin with an exceptionally deep black colour, offering a perfect balance of print speed, high accuracy, presentation-ready appearance, rigidity and a simple, reliable workflow.

Flexible 50A Resin V2


Flexible 50A Resin V2 is a soft, translucent elastomeric material with a Shore 50A hardness, ideal for prototyping parts normally produced in softer rubbers and silicones.

Flexible 80A Resin


Flexible 80A Resin is a stiff, soft-touch, translucent elastomer with a Shore 80A hardness, ideal for prototyping rubber-like parts with the flexibility of hard rubber or TPU.

Rigid 10K Resin


Rigid 10K Resin is an extremely stiff, glass-reinforced material similar to glass and fibre-reinforced thermoplastics. It prints with a smooth, matte and glossy surface finish and offers high resistance to heat and chemicals.

Tough 1500 Resin


Tough 1500 Resin is a resilient, skin-safe material offering strength and stiffness comparable to polypropylene. It is the ideal resin for durable, flexible parts: prototypes that bend and spring back quickly to their original shape, jigs, fixtures and components subject to repeated flexing.